Limited Time SaleUS$28.73 cheaper than the new price!!
| Management number | 211151352 | Release Date | 2026/04/04 | List Price | US$19.16 | Model Number | 211151352 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Specification: Range: LOW: 0? 1999us / cm HI 0? 19.99ms / cm Resolution: LOW: 1us / cm HI 0.01ms / cm Accuracy: ±2% FS Battery: 4 * 1.5V (without battery) Temperature compensation: 0-50°C Working temperature: 0-50℃ Size: 170×50x28 mm Steps 1. Remove the protective cover. 2. Wash the electrode with distilled water, and then dry it with filter paper. 3. Turn on by the "ON-OFF" switch. 4. Put the electrode into the liquid to be tested and stir gently. Wait for the number to stabilize, slide the [ms/us] switch to "ms" or "" to read the final value. 5. After use, clean the electrode and put on a protective cap. EC calibration 1. Slide the [ms/us] switch to the "ms" position, then immerse the conductivity electrode in the 12.88ms/cm standard buffer solution, and then shake it gently. 2. When the displayed value is stable, press "ms/cm" at the bottom to adjust Until 12.88ms/cm is displayed. Wash the electrode with distilled water and dry Use filter paper. 3. Immerse the equipment in the 1413us/cm (1.41EC) standard solution and slide [ms / ] Switch to the "" position, when the displayed value is stable, press the bottom " / cm" to adjust until it displays 1413 / cm. Precautions 1. During the test, please stir the electrode and avoid air bubbles. Otherwise it will affect the results. 2. If the error is too large or the EC value does not return to 0, immerse the EC electrode in ethanol and shake it for 5-10 seconds to clean the electrode.
| Manufacturer | TXGJWRA |
|---|
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form